Analysis of beer manufacturers on methods to extend service life of filling machines

Nowadays, in order to improve the efficiency of beer filling, beer enterprises have started to use beer filling machines one after another. As we all know, no matter what equipment is used for a long time, some problems will inevitably occur, this requires maintenance, so do you know how to properly maintain the beer filling machine and prolong its service life? Next, Shandong trano, the manufacturer of the filling machine, will introduce it to you. 1. Regularly carry out detailed maintenance and inspection of the beer filling machine. In the process of using the machine, it is inevitable that there will be some problems such as loose screws or equipment defects and faults, but it is easy to be ignored, over time, our machines are prone to appear. 'One change makes all change' The use of the problem, so in order to avoid this problem, Shandong trano recommends that you can regularly repair the machine, including the loosening of the screws, and some equipment aging or rust need to be maintained, timely processing. In this way, some small problems can be avoided, which affect the use efficiency of the filling machine, and regular maintenance and repair can also prolong the service life of the filling machine! 2. Control the operating environment and material temperature of the filling machine. During the operation of the filling machine, the power supply voltage should be stable and the fluctuation range should be controlled at ± 15%, while the material temperature should be kept at 10 ℃-- 40℃, the working ambient temperature should be kept at 5℃--40 ° C. If the temperature is too low, the mechanical parts of the filling machine may be difficult to operate. Since the material is basically liquid, if the temperature is too low, if it freezes in the machine, it will not only affect the efficiency, but also expand due to heat and contract with cold, icing will damage the internal equipment of the filling machine, thus shortening the service life of the filling machine, so the ambient temperature should be well controlled. 3. The filling machine is often cleaned and maintained. We all know that the filling machine is not a kind of product, so after filling a product, the residual substances in the filling machine should be cleaned in time, the key parts of the equipment can be cleaned, water and cleaning liquid can be injected, and the equipment can be started up and run once or twice. At the same time, the metering device should be cleaned, clean and smooth, otherwise, it will affect the next product measurement and ensure the accuracy and safety of production. 4. Regularly train the operators of the filling machine to operate the operating crew of the filling machine for regular training, because the filling machine is a regular filling equipment, therefore, operators must have regular ability to use the filling machine well and use the filling machine correctly. If the quality of the personnel operating the filling machine is not enough, it will not only affect the use efficiency of the filling machine, but also affect the service life of the filling machine if the filling machine is not operated properly. I believe everyone has a certain understanding of the filling machine after reading the relevant contents about prolonging the service life of the filling machine introduced by Shandong trano, the manufacturer of the filling machine above, I hope the above contents can be helpful to everyone. We should pay attention to the problem of prolonging the service life of the filling machine and carry out regular maintenance. : Filling machine manufacturer