loading


Beer equipment fermenter why uncomfortable bitter3

Under normal circumstances, the bitter taste of beer mainly comes from the а - hop resin Acid isomerization product, its performance is comfortable and refreshing, disappeared after dinner. But sometimes conical anomalies in beer fermentation tank liquid equipment will be uncomfortable bitter, show the entrance to the rough, not liquor taste, or after a bitter, its reason mainly has two aspects of raw material and process. 1, a raw material. The brewing water residual alkalinity, total hardness, magnesium ion, iron ion carbon content is too high. b。 Brew water PH is too high. c。 Add the time hop Chen wort. d。 Poor quality of malt, wheat skin coarse and protein and tannin content is higher, or special malt baked focal temperature is too high. 2, a process. Saccharification process. Saccharification and wort filtration time is long, make excessive tannins, anthocyanins and fatty acid into the wort; Filtered wort turbidity, feeding, mixing and wort excessive oxygen when mash, polyphenol oxidation serious; Glycosylated feeding is used when the last time washing water. b。 The fermentation process. Hot cold sludge separation effect is bad; Bubble lid sinking into the wine; Process piping health unqualified; After high temperature storage, and more yeast in wine storage; Excessive fermentation to produce by-products higher alcohols and esters.

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect