loading


Beer equipment of safety and health management?4

In the process of beer production, the process of health is a key link. After the pollution of beer, can lead to the taste of beer, serious when still can make sour beer deterioration, caused economic losses. In order to guarantee the good production environment, brewing equipment cleaning and sterilization is necessary. CIP cleaning system is the most commonly used cleaning and sterilization of equipment, its operation is simple, cleaning and sterilizing thoroughly. Purpose and the role of cleaning is clear the yeast on the tank wall, pipe, protein coagulum, hop resin, oxalic acid, tartaric acid salt, salt carbonate and other organic and inorganic substances, prevent beer non-biological pollution in production; Purpose and the role of sterilization is the use of appropriate bactericide can kill bacteria, fungi and other microbes, prevent biological pollution in beer production. Saccharification equipment health: under normal temperature, the first 10 min preflush with water; Then configure 1% ~ 2% sodium hydroxide solution, heating to 80 ~ 85 ℃ for 30 min CIP cycle; The next in 90 ~ 95 ℃ hot water for 30 ~ 40 min CIP cycle. Fermentation equipment health: fermentation tank hygiene quality had a great influence on the quality of beer, clean sterile fermentation tank is the most basic requirements. Under normal temperature, direct rinse; Then configure 2% ~ 4% of alkaline solution, CIP cycle heating to 80 ~ 85 ℃ for 30 min. And then with water to wash 5 ~ 10 min, then configuration of 1% ~ 2% nitric acid or sulfuric acid solution at room temperature 30 min CIP cycle; Reoccupy clear water is rinsed with 5 ~ 10 min, room temperature configuration 0. 35% ~ 0. 5% of fungicide for 30 min CIP cycle, and finally with sterile water to wash to remove residual disinfectant. Wort cooler health: in general brewery wort cooler is alkaline cleaning, the frequency of cleaning needs in place, because the wort cooling, coagulation precipitate a considerable amount of protein, wine of flower ester, etc. , accumulate in the hamper between cooling plate heat exchange effect, to reduce the flow rate of cooling, followed the quality of beer are affected, such as chroma deepened, an indication is aggravating. After alkaline cleaning, use hot water to wash away the remnants of lye. Beer equipment is very common in our life, is also used more, so for beer equipment safety and health management you should understand! Beer equipment customization and purchase, etc. Welcome to my company, beer equipment, the safety of the relationship to the we drink to clean and safe. Demand for beer equipment could find machinery, our company is specialized is engaged in the beer equipment, beer production equipment, brewed beer equipment, etc.

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect