loading


Brewed beer equipment - Saccharifying system operation method

Purchased the brewed beer equipment, but also know how to use, saccharifying system is the core of the whole equipment, saccharification equipment how to go to the correct operation, small beer equipment manufacturer to make a simple experience sharing: saccharification equipment operation, 1) Equipment check: check the boiling pot, filter tank ( Small equipment saccharification and boiling kettle) Pipe fittings, valves, meters and water, electricity, steam supply is normal, no abnormalities, clean, ready to release; ( 2) Preparation of feeding water: in the boiling pot add water 500 l, start heating, electric heating process to open 3 - vortex valve and wort pump 5 minutes to mix, heat up to 68 ℃, stop heating; Open the relevant valves, the start wort pump, feeding water from the pump at the bottom of the filter tank into 275 l. ( 3) Feeding 55 ℃ ( Protein decomposition) : start the filter tank, stir to filter malt powder into the slot, stir well, stop stirring, start the time; After wheat beer first into malt, stir well, put in wheat malt, then stir well; Keep temperature 55 + / - 1 ℃, time 70 minutes; ( 4) Preparation of water: the mash boiling pot to add water to 350 kg, began to heat, heat up to 100 ℃, stop heating; Wort pump, open the valves, ready to launch the mash; ( 5) The mash 66 ℃ ( Mashing) : put the mash scooped up inside the filter tank, mixing and pumping 100 ℃ hot water from the filter tank bottom, the mash temperature to 66 ℃; Guinness after temperature against the good, add burnt malt and black malt powder, stir well, 3 - 5 minutes) ; 66 ℃ for 80 minutes; ( 6) Line connected to wort sterilization: line, since the boiling pot to form circuit, start wort pump circulating hot water for 20 minutes ( Water temperature is not less than 80 degrees) , and then the hose connection to the fermentation jars of material ( Alcohol fermentation tank material mouth to sterilization) 。 If you need to learn more knowledge of small beer equipment can focus on: http://tranogroup. Com, or directly give us a message!

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect