loading


Commonly used beer equipment--German equipment

Classic saccharification two-body three-vessel (German equipment) Generally, saccharification and boiling are integrated, and the filter tank and the rotary sedimentation tank are integrated, in which the filter tank and the rotary sedimentation tank are divided into upper and lower layers. The upper layer is a filter tank, and the lower layer is a cyclotron sedimentation tank. At present, fine brewing beer equipment is widely used. Its advantages will be relatively more: 1) The appearance is thin and high equipment, which conforms to the Chinese aesthetic standard (Bony beauty). 2) The heating area of the saccharification/boiling pot is generally very large, and the heating speed is fast. 3) Saving territory can also reach the floor area of the traditional saccharification two devices; 4) When the wort is filtered, the saccharification/boiling pot can prepare the washing water, and the washing can be carried out at the same time of filtration, which can shorten the saccharification time by 30 ~ 50 minutes. 5) The position of the filter tank is relatively high, and natural filtration can be realized when wort is filtered (Wort is filtered by gravity) , The filtering speed is fast, the clarity of the wort is high, even if the operation is wrong, there will be no phenomenon such as the compaction of the grain or the deformation of the sieve plate. It can also be filtered by the frequency conversion pump (If you want to explain with the equipment manufacturer for Suction filtration). 6) Due to the existence of a separate cyclotron sedimentation tank, a vertical cylindrical design is adopted. Therefore, after boiling, the wort enters the rotary sedimentation tank through the pump in the tangent direction, which can effectively sink the rotary heat coagulation and hop residue, etc, therefore, the separation effect of distiller's grains and Heat coagulation is better. 7) Generally, 2 batches can be brewed in one day. If you consider staying up late to work overtime, you can brew 3 ~ 4 batches, in the peak period of beer sales, can brew more wine in the shortest time. Its disadvantages are: 1)The height of the equipment has requirements on the height of the site. 2)The cleaning of the equipment is more tiring. 3)Equipment investment is higher than that of traditional saccharification equipment. Company website: tranogroup. COM

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect