Daily maintenance and precautions of beer filling machine

Beer filling machine is a common filling machine for beer enterprises. During the long-term use of beer filling machine, operators should pay attention to the daily maintenance and maintenance of beer filling machine, to ensure the normal and stable operation of the beer filling machine must be inseparable from the maintenance of the beer filling machine, it can be said that the daily maintenance of the beer filling machine is indispensable. Daily maintenance and precautions of beer filling machine: 1. Regular inspection and maintenance: check the starting components such as cylinder, solenoid valve, speed regulation and electrical parts every month. The inspection method can be adjusted manually to check whether it is good or bad and the reliability of the action. The cylinder mainly checks whether there is air leakage and clamping stagnation. The solenoid valve can be manually forced to act with IP segment to see if the solenoid coil is burned and the valve is blocked, the electrical part may be checked against the indicator light of input and output signals, such as checking whether the switch elements are damaged, whether the lines are disconnected, and whether the output elements are working properly. 2. Daily construction and maintenance: whether the motor is running normally, whether the safety environment is normal, and whether the cooling system is abnormal. Whether there is abnormal vibration, abnormal sound, whether there is abnormal overheating, discoloration. 3. After each use on the same day, clean up the connecting pipes of the beer filling machine in time, especially when replacing products, use clear water to pass through the pipes three times (50KG of water from the filling port) , And each time to fill the entire pipeline, after repeated three times, you can enter the pre-packaged state, but the whole barrel of the package should be poured into the reaction tank, re-stirred for 2 minutes before formal packaging. 4. After the whole filling is completed and stopped, the dust on the surface of the beer filling machine and the residual feed liquid should be wiped clean with half a thousand towels to avoid corrosion to the filling machine. In addition, wipe the control panel with a thousand towels. The buttons and connecting lines on. 5. The operator on duty checks the outer skin of the edible oil filling machine line every day, and the equipment manager checks the connection line and joint of the filling machine in depth every week to prevent the joint from falling off and affecting the filling accuracy, avoid leakage, short circuit and other safety accidents. The use of beer filling machine can greatly improve the filling efficiency of beer, but many customers in the use of beer filling machine in the process of not paying attention to the daily use should pay attention to the matters of the filling machine in the use of the process of life is shorter, it directly affects the efficiency of beer filling, so the daily maintenance and precautions of beer filling machine must be understood!