Description of operation process of beer filling machine

With the rapid development of beer industry, beer filling machine has been widely used. In order to ensure that beer filling machine will not fail in the working process, before using the beer filling machine, you must understand the operation process of the beer filling machine. 1. Before using the beer filling machine, you need to carefully read the instruction manual to ensure the correct operation of the beer filling machine. 2. Place the beer filling machine safely and fix it. 3. Use DN25 pressure-resistant hose to connect the liquid inlet of the isobaric filling machine with the beer buffer tank (Wine tank)Liquid outlet, solid and reliable connection; The carbon dioxide air inlet of the isobaric filling machine (Outer diameter: 8mmPU tube) Connect with the backup pressure pipe of the beer buffer tank to ensure that the filling pressure of the filling machine is consistent with the pressure in the beer buffer tank. 4. Connect the power supply (Single phase 220 V), Compressed air source (Air source pressure shall not be less than 0. 4 MPa) , With an outer diameter of 10mmPU tube, please add about 2/3 cup of sewing machine oil to the right oil cup of air source processor afc2000. 5. Adjust the filling height according to the height of the filling barrel or bottle. The height of the bottle mouth should be the same as that of the air inlet of the filling valve (Return air hose) The lower mouth is flat or low 1 ~ 5mm, polyester bottle can be used as a special bottle rack, which can be adjusted at one time according to the height of the bottle mouth. The above is the description of the operation process of the beer filling machine introduced to you. After the beer filling machine is used, the maintenance work of the machine should be done well, so as to better ensure the better work of the filling machine.