loading


How does the store configure craft beer equipment?

Now it is different from the past. In the past, the brewing of beer was mostly operated manually, but now the brewing of beer requires certain beer production equipment, the craft beer equipment has been welcomed by many people. If it is a small shop, how to configure craft beer equipment? Beer equipment manufacturers-- Shandong trano Packaging Equipment Co. , Ltd. has brought two sets of plans for everyone. First, the last set of 500 liters of fine brewing beer equipment, with four fermentation tanks, the monthly output can reach about three tons, because lager's wine fermentation cycle is long enough to drink, about 20 days, four fermenters were used once a month, and only two tons of wine were used for all four fermenters, but the equipment was not cheap, about 150 thousand sets. However, according to insiders, it is not easy to use. There are many minor problems. If you want to have fewer minor problems, you have to buy some branded equipment, but the price is not cheap. You have to buy more than 200 thousand sets. There is also a pure electricity, to use three-phase electricity, have to be equipped with a professional factory, and add overhead, because the area is large, so the factory is at least two hundred square meters, the monthly rent of the two hundred-square-meter factory building is about 10 thousand, plus a worker for decoration and preliminary material purchase, at least 400 thousands or 500 thousands must be prepared. Second, with a pot of 100 liters of American classic three barrels, the advantage is that the output is not low, the price is cheap and affordable, but this depends on the degree of convenience. Craft beer equipment that can be produced by trano-- American three barrels, its pot is 130 liters, a pot of wine 100 liters, 5 hours can do a pot, two pots a day is 10 hours to complete, then it is equipped with a 200 liter fermenter. The above content is the configuration scheme of two kinds of fine brewing beer equipment recommended by beer equipment manufacturers for everyone, which is very practical for small shops that have just started their business, and everyone can grasp it at their discretion. : Beer equipment manufacturers craft beer equipment

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect