loading


How sweet beer brewed beer equipment4

Sweet beer brewed beer equipment, beer flavour and colour and lustre and compare basic close, transparency is better than wheat essence dew and lattice gas, low concentration, taste sweet, colour and lustre is shallow, the characteristics of small bitter taste, low alcohol content. Very suitable for female friends to drink, especially not accustomed to the bitter taste of beer and more people are drinking alcohol. A, the pretreatment of the barley malt and rice, malt crushing should try to be less wheat skin shattered, no big powders in the skin. Shredded wheat skin more than 20 # screen should be accounted for 20%, meal 40 # screen above 50%. Powder in the 80 # screen above 15%, fine powder 80 # screen below 10%, m barley shattered the crushed the better, fine powder should be accounted for more than 40%. Second, the ratio. Malt 100%, water 500%, lactic acid 100 ml per 100 kilograms, hop 0. 2%, sugar 20%. Third, saccharifying methods ( 100% malt) 。 Adding malt to five times the amount of water and lactic acid ( Or hydrochloric acid) Adjust pH to 5. 5 - 5. 6, heating up to 50 ℃ keep 90 minutes, and then heat up to 65 ℃, 40 minutes, and then heat up to 78 ℃, 20 minutes, glycosylated end filter, the residual water filtration, the filtrate to merge, add white wine, sugar concentration in 8% (best after Hammer, BX) 。 Wash tank 75 - water Four times as large as 80 ℃, dosage of material weight. To join in the wort or 0 total mixed juice. 02 - 0. 05% of the hop extract ( With a 80 - 90° Hot water extraction) 。 Then put the wort boiling 90 minutes. Fourth, fermentation. Boiled wort to ChenDianDe, cooled to 50 - Around 60 ℃, precipitation 1 - 1. 5 hours. After clarification of the wort and cold to 10 ℃ or so. Add cold wort on yeast cylinder, add 0. 5% of the yeast or yeast mud, and then turn into fermentation tank, sterile air bubbled into first 10 minutes, the yeast breeding, then under the condition of no more than 13 ℃ fermentation before 98 hours. After the fermentation, fermentation medium available unitary MianBing filter two filter ( Filter pressure of 0. 8 - 1. 0 kg/cm2) To wine clear transparent. The filtered liquid cooling to 2 - 4℃( Use of refrigeration equipment, winter in the north to natural cooling) With carbon dioxide mixer in 4. 0 - 4. 5 kg/cm2 pressure, make wine juice mixed with carbon dioxide. Mixed filling, capping, sterilization, through inspection qualified packing and label, the factory. Sterilization, the water temperature is not high and low, in the 65 - 15-75 ℃ hot water sterilization 20 minutes.

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect