A Manufacturer and Supplier of Beer Kegs, Beer Keg Washing and Filling Machines, etc.

It is necessary to understand the principle and maintenance of beer filling machine

by:Trano     2019-12-27
Beer filling machine is mainly used for glass bottles, filling and sealing equipment for beer drinks. With the development of society and the continuous provision of people's living standards, consumers also have a certain understanding of bottled beverages. Beer filling machine is just suitable for the development of this era. The filling machine is a full-automatic combined machine, which realizes automation in the whole process and is the best choice for the majority of beer manufacturers. The whole beer filling machine has scientific and reasonable design, beautiful appearance, complete functions, convenient operation and maintenance, and high degree of automation. Beer filling machine is an important equipment of beer filling production line. It plays a key role in the outer packaging of beer production. Let's look at the workflow of beer filling machine together! The boxes with empty bottles are stacked on the tray, sent to the unloading tray machine by the conveyor belt, the trays are unloaded one by one, the boxes are sent to the unloading machine with the conveyor belt, the empty bottles are taken out from the box, and the empty boxes are sent to the washing machine through the conveyor belt, after cleaning, it is sent to the packing machine to load the bottle containing the beverage. Empty bottles taken out from the unloader are sent to the bottle washer for disinfection and cleaning by another conveyor belt. After being inspected by the bottle inspection machine and meeting the cleaning standards, they enter the filling machine and capping machine. The beverage is loaded into the bottle by the filling machine. The bottles filled with beverages are sealed by the capping machine and transported to the labeling machine for labeling. After labeling, they are sent to the packing machine for loading into the box and then sent to the stacking tray machine for stacking on the tray and sent to the warehouse. The working principle of beer filling machine: the clean bottle from the bottle washing machine is fed into the bottle feeding screw of the filling machine by the bottle feeding belt, and sent to the bottle supporting cylinder of the rotary table through the bottle feeding star wheel and raised. The bottle mouth is tightly pressed under the guidance of the centering device to form a seal. After the bottle is vacuumed, the back pressure gas in the liquid storage cylinder (CO2) When the gas pressure in the bottle is equal to the gas pressure in the liquid storage cylinder, the liquid valve is opened under the action of the liquid valve spring. At this time, the beer is guided by the umbrella-shaped reflex ring on the return pipe. It is automatically poured into the glass bottle along the bottle wall, and the CO2 in the glass bottle is replaced back into the liquid storage tank through the return pipe. When the wine rises to a certain height and the return pipe is closed, the wine is automatically stopped. Then the liquid valve and the air valve are closed, and the pressure gas at the bottleneck part is discharged to prevent the gushing of the gas liquor when the glass bottle drops, thus completing the whole filling process. Maintenance and installation of beer filling machine 1. Because beer filling machine is an automatic machine, the sizes of bottles, bottle mats and bottle caps are required to be unified. 2. When adjusting the beer filling machine, the tools should be used properly. It is strictly prohibited to use too large tools or use too much force to remove parts so as not to damage the parts or affect the performance of the machine. 3. Every time the beer filling machine is adjusted, be sure to tighten the loose screw and turn the machine with a shaking handle to see if its action meets the requirements before you can drive. 4. The beer filling machine must be kept clean. It is strictly prohibited to have oil stain, liquid medicine or glass debris on the machine to avoid damage to the machine. Therefore, it must be: during the production process of the machine, remove liquid medicine or glass debris in time. The surface of the machine should be cleaned once before the shift, and clean lubricating oil should be added to each activity department. It should be scrubbed once a week, especially when it is not easy to clean in normal use or blown with compressed air. The above is the principle and maintenance of beer filling machine. Do you have a certain understanding through the above introduction? Shandong trano Packaging Equipment Co. , Ltd. is a domestic manufacturing company specializing in the research and development, production, sales and service of automatic packaging machinery products, the company has a group of engineering and technical personnel engaged in the research and development of automation equipment. The company: brewing equipment filling equipment, cleaning equipment, sealing equipment, beverage production equipment, Sterilizer/dryer and related accessories. : Beer filling machine
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: keg@sskeg.com