Maintenance skills and precautions of beer filling machine

Beer filling machine must be no stranger to some enterprises! It is very common in beer enterprises, so what points should we pay attention to prolong the service life of beer filling machines in daily life? What are the maintenance skills? Let's go and see below! Daily maintenance and precautions of beer filling machine: 1. Regular inspection and maintenance, and monthly inspection of its starting components such as cylinder, solenoid valve, speed regulation and electrical parts. The inspection method can be manually adjusted to check the quality and operation reliability, the cylinder mainly checks whether there is air leakage and sticking phenomenon, and the solenoid valve can be manually forced to act to check whether the electromagnetic coil of IP safety section is burned and the valve is blocked, the electrical part may be checked against the input and output signal indicator lights, such as checking whether the switching components are damaged, whether the lines are disconnected, and whether the output components are working properly. 2. Daily inspection and maintenance, whether the motor is running normally, whether the safety environment is normal, and whether the cooling system is abnormal. Whether there is abnormal vibration, abnormal sound, abnormal overheating and discoloration. 3. After each use on the same day, clean the connecting pipe of the beer filling machine in time, especially when replacing the product, use clear water in the pipe three times (Filling outlet water 50 KG) And each time to fill the entire pipeline, after repeated three times, you can enter the pre-packaged state, but the whole barrel of the package should be poured into the reaction tank, re-stirring for 2 minutes before the formal packaging. 4. After the whole filling is completed and stopped, wipe the dust and residual material liquid on the surface of the beer filling machine with half a thousand towels to avoid corrosion to the filling machine. Wipe the control panel with a thousand towels. On the buttons and connecting lines. 5. The operator on duty shall inspect the outer skin of the edible oil filling machine line every day, and the equipment manager shall conduct in-depth inspection of the connecting lines and joints of the filling machine every week to prevent the loose joints from affecting the filling accuracy, avoid leakage, short circuit and other safety accidents. I hope that after reading the above content, you can maintain the beer filling machine well, extend its useful life and improve the production efficiency of beer. For more details, please see the next decomposition! : Beer filling machine