Principle, structure and operation process of pop can filling machine

The pop can filling machine is to improve the vacuum degree in the tank. It can be equipped with steam injection device according to customer's requirements. It can be equipped with remote monitoring system to ensure the maximum technical support to customers. How much do you know about it? Do you know the principle, structure and operation process of the filling machine? Next, the beer filling machine factory will introduce it to you below. First, the working principle of the structure of the cans filling machine design is reasonable, the model is small, easy to operate; The piston and cylinder of the cylinder are made of polytetrafluoroethylene and stainless steel, meeting GMP requirements; The filling quantity and filling speed can be adjusted arbitrarily with high precision; The filling head adopts anti-drip, anti-wire drawing and lifting filling device; This machine can be modified into a multi-head, explosion-proof and overflow filling system according to customer's requirements. Second, the operation process of the cans filling machine 1, the liquid bottle to be poured upside down on the work blue, check the liquid bottle under the mouth should be aligned. 2. Place the working blue in the vacuum tank, cover the lid and lock it. 3. The beer filling machine factory reminds everyone to close the venting valve and the liquid inlet valve, open the vacuum pump, adjust the vacuum regulating valve to make the vacuum degree meet the technological requirements, and step on the foot plate to insert the liquid into the lower opening of the filled liquid bottle. 4. Slowly open the liquid inlet valve, when the liquid level in the tank rises, and at the same time open the venting valve to lower the liquid level, and the liquid is pressed into the liquid bottle from the tank. Adjust the two valves reasonably to keep the liquid level between the specified liquid level in the mirror. 5. When the vacuum gauge pointer is in the 0 state, it is proved that the filling liquid has been completed, and the foot is returned to the board. The quick-opening can lid can be opened to remove the filled liquid bottle. For troubleshooting of vacuum pump, if the vacuum pump is not used for a long time, the used oil in the pump should be drained, washed and replaced with new oil to prevent water in the oil from corroding the pump body. The above is the principle structure and operation process of the cans filling machine summarized by the beer filling machine factory. I hope that the above content can help everyone, if everyone is interested in our products, welcome everyone to visit and buy, we will provide you with excellent service. : Beer filling machine