loading


Self-brewed beer equipment three-device saccharification Equipment Introduction (On)

According to years of equipment manufacturing experience, the manufacturer of self-brewed beer equipment continues to share the three-vessel saccharification system with everyone, and the editor has already shared the two-vessel saccharification system (Click to view). The three-vessel saccharification system is divided into three-vessel two-body and three-vessel three-body. This article only introduces the two-vessel three-vessel saccharification system, three-vessel two-body equipment: generally, it is a boiling pot, saccharification filter tank, rotary sink, the filter rotary sink actually consists of two layers of structure, the upper layer is the filter tank, the lower layer is the rotary sink, which is common in beer houses and restaurants. The advantages of saccharification system combined with three-vessel type: ① compared with the three-body three-vessel saccharification system, the whole system is more compact and the relative occupied area is small. (2) the filter tank and the rotary sedimentation tank are separated up and down. Wort can be naturally filtered by gravity, with fast filtration and high clarity of wort. Even if the operation is wrong, there will be no phenomenon such as sieve plate deformation caused by the compaction of the grain layer. ③ The heating area of the steam jacket of the boiling pot is generally very large, and the heating speed is fast. ④ The Rotary sinking groove is designed as a vertical cylindrical groove, because it is a special rotary sinking groove, and the rotary sinking mouth is designed as a tangent rotary sinking mouth, so the separation effect between distiller's grains and thermal solidification is better. 5 When the wort is filtered, the boiling pot can prepare the washing water, and the washing can be carried out at the same time of filtration, which can shorten the saccharification time by 30- 50 minutes, the utilization rate is higher than that of the two-vessel saccharification system. ⑥ Generally, 2 batches can be brewed in one day. If you consider staying up late to work overtime, you can brew 3-a day- 4 batches, in the peak period of beer sales, can brew more wine in the shortest time. Everything has two sides, and its main disadvantages are: ① the equipment is generally higher than the traditional saccharification equipment and has certain requirements for the height of the site; (2) the equipment investment is higher than that of the traditional saccharification two-vessel equipment, and the saccharification volume of the combined three-vessel equipment is limited.

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect