loading


Self-brewed beer practice and production process!

Beer is a must for this season, so how can the self-brewed beer equipment be better? For Jinan's home-brewed beer practice, let's look at its characteristics together. It has always been our responsibility to let you have a more environmentally friendly home. The following micro beer filling machine manufacturer Shandong trano for everyone to introduce in detail: 1, the malt grinding, skin cracking. 2. Put the malt into the saccharification insulation barrel, add 15 liters of hot water to mix, the target temperature is 66-68 degrees Celsius. Saccharification for one hour. 3. Filter the maltose juice to the cooker, add 5 liters of hot water to mix the malt paste twice, and mix with the sugar juice in front. 4. Boil the sugar juice. After 5 or 40 minutes, add some hops, cook for another 60 minutes, add the remaining hops, and cook for 6 minutes. 6, the sugar juice, rapid water bath to cool to 23 degrees Celsius; Transfer to a fermentation barrel and add yeast; Fermentation 7-14 days. 7, bottling, add a small amount of sugar, and then ferment. After 14 days, store in the refrigerator. Open drink! The production process of fine brewing beer equipment: 1. Barley malt invades in hot water to release maltose and form maltose juice, I . e. malt juice, which is like making tea. 2. Malt juice is separated by filtration on grain residue. 3. The Filtered malt is boiled again and hops are added to flavor the malt. (Like soup) 4. After the malt is cooled, it is put into yeast fermentation. 5. Yeast converts sugar juice into alcohol and carbon dioxide during fermentation. 6. After the fermentation is completed, the temperature should be controlled and stored for another half month to mature the beer. The above is about Jinan's self-brewed beer practice and the production process of fine brewed beer equipment. I hope it will be helpful to everyone! Our company specializes in producing mini beer filling machines, beer barrel cleaning machines and other beer production equipment. If necessary, please call for advice! ! : Micro beer filling machine

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect