Methods to solve common faults of pneumatic liquid quantitative filling machine: 1. How to solve the problem of inaccurate filling quantity of pneumatic liquid quantitative filling machine?
When filling large specifications, the Hopper is insufficient in feeding, resulting in unstable liquid level. The feeding amount can be increased or the air valve above the small cylinder can be turned off again to reset the filling time (Longer filling time)Slow down the filling speed to solve.
Second: the liquid level of the filling machine is stable. Why is the filling quantity inaccurate?
There are sundries blocking the filling channel, mainly at the Hopper entrance or in the filling mouth, check and clean it. Three: How can the filling machine drip after it is closed?
In case of such a failure, the filling mouth may be damaged. The filling mouth can be taken out, and the filling mouth can be gently smoothed on the water grinding sandpaper after the filling mouth is repaired, another possibility is that the sealing ring in the filling head is damaged and the sealing ring needs to be replaced. :
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: email@example.com
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist