Teach everyone how to clean beer production equipment correctly

Speaking of beer production equipment, everyone should know it, but they may not know much about it. Since the equipment needs to be in constant contact with materials during use, it will accumulate a lot of dirt, this has a great impact on the quality of the beer it produces. Do you know how to clean the equipment correctly? Next, Shandong trano, a beer filling machine manufacturer, will introduce it to you below. 1. Cleaning the heat exchanger in principle, cleaning the heat exchanger is the same as cleaning the pipeline. In the normal operation State, the medium in the heat exchanger is in the prime flow state, so if you want to have a better cleaning effect, the heat exchanger in the production equipment should be cleaned with a cleaning solution about 20% to higher than the original design flow rate. 2. Automatic can washer can be used to clean the tank in the production equipment. The can washer is divided into two types: mechanical type and spray ball type. If the beer production equipment is dirty or the diameter of the tank is relatively large, this situation is suitable for the mechanical can washer, because its outlet pressure can be increased, which can increase the cleaning strength and increase the cleaning radius. Compared with the spray ball can washer, the mechanical can washer has a lower flow of cleaning solution when in use. 3. Cleaning pipelines in order to enhance the cleaning effect, attention should be paid to playing its mechanical role when cleaning pipelines in production equipment. In order to receive better cleaning effect, when using hot cleaning solution, the flow rate in the tube should be controlled to 1. 5 per second; When using cold cleaning solution, different flow rates should be determined according to different pipe diameters. At the same time, the cleaning problem of CO and compressed air pipelines and their accessories should also be paid attention. 4, cleaning production equipment parts and machines There is no fixed method for cleaning parts and machines of production equipment. It is OK to clean according to the normal cleaning steps of general equipment. In the process of beer production, the generation and precipitation of impurities and dirt are always inevitable, so it is particularly important to master the correct cleaning method of beer production equipment. I hope that the above-mentioned beer filling machine manufacturer Shandong trano's four tips on correct cleaning equipment can be helpful to everyone. : Beer production equipment