loading


The preservation of the wine4

1, the best preserved temperature should be about 13 ℃. It's better to keep a constant temperature, avoid severe changes of temperature, otherwise you will have a great harm on wine quality. Even caused by excessive oxidize wine deterioration. 2, humidity wine storage ideal humidity is between 60% and 70%. If the humidity is too high, easy to make the cork and wine label going mouldy; And humidity will make cork lose elasticity, not tight sealed bottle, humidity is too low or too high will cause certain influence to the quality of the wine. 3, the ultraviolet ray in dark light damage to the wine is very big, will accelerate alcohol oxidation process, therefore, want to long-term preservation of wine must be put into a cool dark place. 4, to prevent vibration suspension in a bottle of wine, the change is a slow process, vibration will make wine accelerate mature, let the wine become coarse. 5, put the traditional put wine bottle way is flat, in fact, bottle up 15 degrees tilt may be used. Needed to store a long time for wine, bottle can not be put down. Because wine storage time long there will be precipitation, if the bottle mouth downward sloping, precipitation will gather in the bottle, after a long time will get there, pour wine, will affect the taste of wine. The previous: beer brewing equipment sterilization method next up: how beer

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect