loading


Two small beer equipment saccharification system is introduced

Two device type saccharification equipment also is we often say two apparatus and equipment, mainly include saccharification of filter tank + boil spiral heavy tank. Mash the function of the filter tank: saccharification and filtering; Boil the function of spiral heavy tank: boil and heavy. If you configure a hot water tank can improve work efficiency by 50%. This set of configuration of saccharifying system advantages and disadvantages, obviously, brewed beer equipment manufacturers to introduce: two device type saccharifying system advantages: (1) simple equipment, less investment. (2) the line is simple, easy to operate. (3) equipment level is low, high requirements on site is not high. Its main drawback is: (1) the wort filtration can only take the suction filter ( The mash within the filter tank, through the wort extract wort pump, pump into the boiling heavy tank) , filter is relatively slow, the winemaker demand is higher, once the operating error, light tight, lead to wheat bad layer filter is difficult, or lead to sieve plate deformation, affect the subsequent use. (2) the device in order to reduce influence on spiral sink, generally do not set the spin cross, main set within the mash tun, spin cross role is to prevent any swirl when mash, apparently, does not set the spin the saccharification of the cross/boiling pot, its easy to form vortex when mash, cause gas into the wort pump, light will form gas in wort pump, heavy may be due to a large number of gas into the wort pump, the formation of cavitation, affect the wort pump life. (3) in the beer equipment manufacturing industry generally set up in boiling pot agitator, because of the boiling pot with the function of the heavy tank, agitator can affect spiral sink effect. (4) the bad water can only be prepared ahead of time, stored in a container or fermentation tank ( Generally not recommended in the fermentation tank, such as improper operation, make easily formed in the fermentation tank vacuum or affect the operation of the water system) Inside, the operation trouble and high heat loss. (5) saccharifying mash method can only be used against the mash, saccharification temperature step less, demanding the quality of malt. 6. Usually a day can only make two batches, and need to winemakers to stay up late to work overtime. When we were in the choice of beer equipment saccharification system must be carefully, this process determines the quality of our beer and batch.

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect