What are the common problems of filling machine and how to solve them?

Filling machinery is one of the essential mechanical equipment for enterprises to realize automatic production. As the name implies, filling machinery is to combine products (Material) It is loaded into a specific container, but when it fails in operation. How should we deal with it? Let's summarize how to solve the frequently encountered problems quickly and efficiently. One. the filling machine has abnormal noise during use. Answer: the reason for the noise may be the lack of lubricating oil or the loose screw causing the parts to shift. If the above is normal, it may be that the mechanical use time is too long, serious wear of parts. 2. The filling machine suddenly does not work? Answer: because the power supply is not connected or there is no air pressure problem, the power supply and air source should be checked to ensure the normal operation of the machine. Three. Filling machine quantitative and filling quantity is not allowed? Answer: The quantification is not allowed because the filling channel is blocked by sundries at the entrance or inside the trough. The solution is to clean up the channel; The filling quantity is not allowed. It is necessary to turn off the ball valve above the filling head again or increase the filling quantity, and set the time again to slow down the filling speed. 4. How to make the filling machine have a longer service life? Answer: The best way to avoid mechanical failure is to check frequently to prevent screws and fasteners from loosening and mechanical seals from being replaced frequently to prevent problems before they occur.