What are the parts of packaging machine system Group Chengdu?

What are the parts of packaging machine system Group Chengdu? This is a problem that everyone wants to know very much. In this chapter, beer filling machine company will tell you about this problem. The packaging machine system generally consists of 13 parts, that is, the system of metal bellows, main feeding pipeline, buffer bin, spiral feeder, pneumatic butterfly valve, return air filling cylinder, lifting weighing frame, automatic decoupling device, pneumatic bag gripper, weighing chain plate machine, conveying chain plate machine and packaging machine generally consists of thirteen parts, that is, metal bellows, main feeding pipeline, buffer bin, spiral feeder, pneumatic butterfly valve, return air filling cylinder, lifting weighing frame, automatic decoupling device, pneumatic bag gripper, weighing chain plate machine, conveying chain plate machine, main control cabinet and control system, return air dust removal system. 1. Buffer bin: slow down the flow rate of materials, discharge the air in the materials, stabilize the material flow, eliminate the influence of upstream logistics on downstream, and improve the control of precision. 2. Screw feeder: single screw feeder, all stainless steel structure, control material flow through frequency converter to meet packaging accuracy requirements. 3. Bag exhaust system: made of stainless steel structure, it is a double-layer sandwich structure. The inner layer is polished and polished for the channel of material filling, the outer layer is a thin-walled structure, and the upper part is equipped with an interface, connect with exhaust pipe. 4. The bag gripper is of stainless steel structure, and the main structure is two pieces of arc-shaped splint, which is driven by the air cylinder and coordinated by the connecting rod. When the bag gripper is closed, the canvas belt on the two pieces of splint is fastened on the cylinder, at the same time splint at both ends of rubber block will bag on both sides clamping; When the packaging is finished, the cylinder drives it to loosen and the packaging bag falls. 5. Weighing body: it is divided into upper frame and lower frame. The upper frame is installed on the chain plate conveyor. The lower frame is a square rigid structure. An explosion-proof sensor is installed in each of the four corners. The upper and lower frames are connected by steel balls and balls, in order to limit the steel ball falling off due to the careless lifting of the upper bench during the work, four adjustable screws are installed on the lower weighing frame, which can limit the lifting of the weighing table and the excessive longitudinal displacement to ensure the rapid return of the bench, adjusting the nut height on the screw can limit the vertical displacement of the bench. 6. Return air dust removal system: the return air duct and dust collector are all made of stainless steel, and multiple stainless steel manual and pneumatic butterfly valves are set on the pipeline to control the gas flow of each pipeline to meet the overall control requirements, the dust collector adopts the method of pulse injection and dust cleaning, which has the advantages of low noise and high efficiency. The recovered dust falls into the downstream collection bucket, and a manual bag gripper is set at the end of the collection bucket, when working, put a packaging bag into the tube opening, and the recovered dust will all fall into the packaging bag. After the bag is full, replace the packaging bag with a forklift fork, which is not only simple and convenient to operate, but also has a good on-site environment. Speaking of which, it is coming to an end. How much do you know about the composition of the packaging machine system? If you have other related questions that you don't know, please visit the beer filling machine company.