What are the parts of the packaging machine system Group Chengdu?

What are the parts of the packaging machine system Group Chengdu? This is a question that everyone would like to know. In this chapter, the beer filling machine company will tell you about this problem. The system of packaging machine generally consists of 13 parts, that is, the system of metal bellows, main feeding pipeline, buffer bin, spiral feeder, pneumatic butterfly valve, return air filling cylinder, lifting scale frame, automatic decoupling device, pneumatic bag clamping device, weighing chain plate machine, conveying chain plate machine and packaging machine generally consists of thirteen parts, that is, metal bellows, main feeding pipeline, buffer bin, spiral feeder, pneumatic butterfly valve, return air filling cylinder, lifting scale frame, automatic decoupling device, pneumatic bag clamping device, weighing chain plate machine, conveying chain plate machine, main control cabinet and control system, return air dust removal system. 1. Buffer bin: slow down the material flow speed, discharge the gas in the material, stabilize the material flow, eliminate the influence of upstream logistics on the downstream, and improve the control of accuracy. 2. Spiral feeder: single spiral feeder, all stainless steel structure, controlling material flow through frequency converter to meet packaging precision requirements. 3. Bag exhaust system: made of stainless steel structure, it is a double-layer sandwich structure, the inner layer is polished and polished for the passage of material filling, the outer layer is a thin-walled structure, and the upper part is provided with an interface, connect with the exhaust pipe. 4. The bag gripper is of stainless steel structure, and the main structure is two curved splints, which are driven by the air cylinder and coordinated by the connecting rod. When the bag gripper is closed, the canvas belts on the two splints are fastened to the cylinder body, at the same time splint at both ends of rubber block will bag on both sides clamping; After the packaging is completed, the cylinder is driven to loosen it and the bag falls. 5. Weighing body: divided into upper frame and lower frame, the upper frame is installed on the chain plate conveyor, the lower frame is a square rigid structure, an explosion-proof sensor is installed at each corner, and the upper and lower frames are connected by steel balls and Ball bowls, in order to limit the steel ball falling off due to careless lifting of the upper bench during work, four adjustable screws are installed on the lower bench to limit the lifting of the bench and the excessive longitudinal displacement to ensure the rapid return of the bench, adjusting the height of the nut on the screw can limit the vertical displacement of the bench. 6. Return air dust removal system: the return air duct and dust collector are all made of stainless steel, and a plurality of stainless steel manual and pneumatic butterfly valves are arranged on the pipeline to control the gas flow in each pipeline and meet the overall control requirements, the dust collector adopts a pulse blowing ash cleaning method, which has the advantages of low noise and high efficiency. The recovered dust falls into the downstream collecting bucket, and a manual bag clamping device is arranged at the end of the collecting bucket, when working, put a bag into the nozzle, and the recovered dust will all fall into the bag. After the bag is full, use the forklift to fork and replace the bag. It is not only simple, convenient to operate, but also good on-site environment. Speaking of which, it is coming to an end. How much do you know about the composition of the packaging machine system? If you have any other questions you don't know, please visit the beer filling machine company. :