What debugging does the gas-bearing beverage filling machine need to do before starting?
by:Trano2020-02-19
1. First, loosen the nut of the full-automatic filling machine and then adjust the screw to change the position of the lower fixed rod.
Therefore, the push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the packing quantity.
The screw is adjusted clockwise as the increment, otherwise it is reduced, and the Middle pointer is indicated.
2. Tighten the nut immediately after adjustment to make the lower fixing Rod and crank firm.
3. Loosen the nut and press different syringe push-pull lengths to determine the correct position of the upper fixing rod.
After the lower fixed rod is adjusted, turn the crank to make the syringe turn to the upper dead center, and then lift the outer sleeve of the syringe up about 2mm to prevent the needle tube from being rotten, and then tighten the nut before starting the machine.
4. Turn on the switch after the gas-bearing beverage filling machine is assembled without error. When the machine is working, the crank drives the syringe to pull the liquid up and down, adjust the speed knob, select the appropriate sub-loading speed, and start normal work, adjust the governor knob, clockwise packing speed is fast, otherwise the speed is slow.
The company's main business: juice filling machine, gas beverage filling machine, PET bottle filling machine, glass bottle filling machine
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: keg@sskeg.com
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist