loading


What is the production process of beer?

Beer is very common in daily life, especially in hot summer. Do you know the beer production process? The following micro beer filling machine manufacturer Shandong trano introduces the production process of beer: first, malt manufacturing, raw material crushing: the malt and rice are crushed by the crusher to the degree of crushing suitable for saccharification operation. Second, brewing saccharification: the crushed malt and starch auxiliary materials are mixed with warm water in a gelatinization pot and a saccharification pot respectively to adjust the temperature. Post-fermentation: in order to make the tender beer mature, it is sent into the wine storage tank or continues to be cooled to about 0 °c in the cylindrical cone bottom fermentation tank, and the pressure in the tank is adjusted to dissolve CO2 into the beer. The wine storage period needs 1 ~ February, mellow taste, suitable for drinking. Filtration: in order to make beer clear and transparent, beer is in-Clear filtration at 1 °c. Third, filling, filling is the last process of beer production, which has a direct impact on maintaining the quality of beer and giving the appearance of beer. The filled beer should meet the hygiene standards, minimize CO2 loss and reduce the air content sealed in the container. Barrel: The barrel is made of aluminum or stainless steel. Barrel Beer is generally fresh beer without pasteurization. Fresh beer tastes good, low cost, but the shelf life is not long, suitable for local sales. Bottled: in order to maintain the quality of beer and reduce the influence of ultraviolet rays, brown or dark green glass bottles are generally used. Empty bottle by dip-bottle of slot (Lye 2 ~ 5% 40 ~ 70 ° C) Soak, then wash with a bottle washer, then fill the beer with a filling machine, and press the cap on the cap. The above is the beer production process introduced by Shandong trano, a micro beer filling machine manufacturer. I believe everyone will know how beer is produced after reading it. Please pay attention to trano's official website for more wonderful information. http://www . Bgmachinery. Com /:

GET IN TOUCH WITH Us
recommended articles
knowledge

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Contact us

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China

Copyright © 2026 TRANO | Sitemap Privacy Policy
Customer service
detect