What is the proportion of material cost to total production cost for 16 oz soda can?

2022-05-31

Trano

The production cost consists of direct material cost, labour cost and manufacturing facility cost. Normally, the material cost takes up about thirty to forty percent of the total production cost. The figure may vary depending on the specific products, while in order to produce high quality 16 oz soda can, we never cut down the investment on the material due to corporate parsimony. Besides, we would invest more in the technology introduction and product innovation to improve manufacturing efficiency and lower the overall manufacturing cost.

Trano Array image4

YANTAI TRANO NEW MATERIAL CO.,LTD. has been a reliable partner for our clients and suppliers, specializing in the manufacture of craft beer bottling machine. The keg washing and filling machine series is one of the main products of Yantai Trano Co.,Ltd.. This product is low-VOC and non-toxic. Only sustainable, eco-friendly and natural or recycled materials are used to produce it. It is available in different dimensions meeting the USA and Euro standards. Seeing from the growing sales, the product has a rather promising application potential. It helps keep constant temperature which will not ruin beer flavour.

Tranocontinues to evolve to meet rapidly changing market needs. Please contact.

GET IN TOUCH WITH Us

input must not exceed 280 in length!

name

Please enter a valid email address!

Please enter a valid phone number!

phone/whatsApp

input must not exceed 280 in length!

company

textarea must not exceed 65530 in length!

content

Why are beverage cans produced in 330ml instead of 300ml or 350ml?

Have you ever wondered why tin beverage cans are produced at 330ml? We explain why these cans dating back to before World War II were produced in volume fractions of 330ml.

While smaller sized cans such as 200ml and 250ml soft drinks have begun to appear, especially in recent years, we've seen the most popular cans be the 330ml can, as in the past.

Why are soda cans made of aluminum?

The pop-top can is made of aluminum alloy, and its inner wall is coated with some organic coatings to isolate the aluminum alloy from the beverage.

The difference between beverage tin cans and aluminum cans

Why are aluminum cans used for packaging, aluminum cans are cheaper than iron cans?

Although the reserves of aluminum in the earth's crust are more than that of iron, the production process of aluminum is much more complicated than that of iron.

How are cans made?

In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA (Aimar Clinan Fraze) invented the pop-top can, that is, the material of the lid itself is processed to form a rivet, jacket The last tab is re-riveted and matched with the appropriate notches to complete the lid.

The use of beer filling machine need to clear this at six!1

the method of beer filling machine need to hold good to reduce the fault in the process of production, to correctly master the operation method, the use of filling machine to ensure the safe and stable operation of filling equipment.

Beer barrel cleaning machine operation should pay attention to these aspects emphatically2

the advantages of beer barrel cleaning can achieve high efficiency, the use effect of beer barrel in favour of late.

Filling machine manufacturers to introduce common affliction of filling machine and its solutions1

the beer filling machine when use can carry on the filling fast, with high efficiency, which can guarantee good filling effect, so when use tend to be some abnormal problems, these problems will affect the normal use of filling machine, we consult to the filling machine manufacturer, then introduce filling machine manufacturer for everybody to introduce common affliction of filling machine and its solutions.

Beer filling machine now has some disadvantages, how much do you know?1

the beer filling machine when use can ensure fast work efficiency, in order to achieve good working effect, which is the key is to save the use of artificial, automation equipment can also flow to the efficiency of the filling machine play a ', the use of such for filling machine also has a good advantage.

Beer production equipment cleaning and sterilization technology

in the process of beer production, and material contact surface of the equipment, due to various reasons will always be some dirt deposition.

Contact Sales at TRANO.

Professional aluminum can manufacturer

Quick links

Products

Contact Person: Mrs.Wang
E-mail: director@packfine.com
Tel: 0086 13054501345
Whats App: 0086 13054501345
We Chat: 13054501345
Address: No. 149 Nandajie Road,Zhifu Area Shandong China