What points do you need to know to increase the service life of the beer filling machine?
As we all know, beer filling machine is a common filling machine in beer production equipment companies. The service life of any equipment is limited. How much do you know about the service life of the beer production equipment?
Do you know what points to pay attention to when increasing the service life of the filling machine?
Next, the beer barrel cleaning machine factory will take you to the following to learn about it.
Shandong trano mechanical equipment tells everyone that if you want to increase the service life of the filling machine, you need to pay attention to maintain them. The following five maintenance skills hope to help everyone.
1. After each use on the same day, clean the connecting pipe of the filling machine in time, especially when replacing the product, use clear water in the pipe three times (Filling outlet water 50 KG)
And each time to fill the entire pipeline, after repeated three times, you can enter the pre-packaged state, but the whole barrel of the package should be poured into the reaction tank, re-stirring for 2 minutes before the formal packaging.
2. After the whole filling is completed and stopped, wipe the dust and residual material liquid on the surface of the beer filling machine with half a thousand towels to avoid corrosion to the filling machine. Wipe the control panel with a thousand towels. On the buttons and connecting lines.
3, regular inspection and maintenance, should check the starting components such as cylinder, solenoid valve, speed control and electrical parts every month.
The inspection method can be manually adjusted to check the quality and operation reliability, the cylinder mainly checks whether there is air leakage and sticking phenomenon, and the solenoid valve can be manually forced to act to check whether the electromagnetic coil of IP safety section is burned and the valve is blocked, the electrical part may be checked against the input and output signal indicator lights, such as checking whether the switching components are damaged, whether the lines are disconnected, and whether the output components are working properly.
4, daily maintenance, beer production equipment factory recommended to check whether the motor is running normally, whether the environment is normal, whether the cooling system is abnormal.
Whether there is abnormal vibration, abnormal sound, abnormal overheating and discoloration.
5. The operator on duty shall inspect the outer skin of the edible oil filling machine line every day, and the equipment manager shall conduct in-depth inspection of the connecting lines and joints of the filling machine every week to prevent the loose joints from affecting the filling accuracy, avoid accidents such as leakage and short circuit.
These are the five points that the beer barrel washing machine factory introduced to increase the service life of the beer filling machine, that is, to do a good job in the maintenance of the filling machine. I hope the above contents can be helpful to everyone. In addition, it is recommended that everyone regularly repair and maintain the equipment to extend its service life as much as possible.
: Beer filling machine
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: firstname.lastname@example.org
We are here to help you! If you close the chatbox, you will automatically receive a responsefrom us via email. Please be sure to leave yourcontact details so that we can better assist