Correct cleaning method of beer production equipment

Because it is often necessary to contact with materials, beer production equipment will always unconsciously accumulate a lot of dirt. This has a great impact on the quality of the beer produced. In order to improve and maintain the quality of beer, we should not only learn the correct beer production technology, but also learn the correct cleaning method of beer production equipment. First, cleaning the pipeline, in order to enhance the cleaning effect, when cleaning the pipeline in the beer production equipment, attention should be paid to play its mechanical role. In order to receive better cleaning effect, when using hot cleaning solution, the flow rate in the tube should be controlled to 1. 5 per second; When using cold cleaning solution, different flow rates should be determined according to different pipe diameters. At the same time, the cleaning problem of CO and compressed air pipelines and their accessories should also be paid attention. Second, cleaning the heat exchanger in principle, cleaning the heat exchanger is the same as cleaning the pipeline. In the normal operation State, the medium in the heat exchanger is in the prime flow state, so if you want to have a better cleaning effect, the heat exchanger in beer production equipment should be cleaned with cleaning solution about 20% to 30 higher than the original design flow rate. Three, clean the tank, can use automatic can washer to clean the tank in beer production equipment. The can washer is divided into two types: mechanical type and spray ball type. If the beer production equipment is dirty or the diameter of the tank is relatively large, this situation is suitable for the mechanical can washer, because its outlet pressure can be increased, which can increase the cleaning strength and increase the cleaning radius. Compared with the spray ball can washer, the mechanical can washer has a lower flow of cleaning solution when in use. Four, cleaning beer production equipment parts and machines, there is no fixed method for cleaning beer production equipment parts and machines, according to the normal cleaning steps of general equipment to clean. The correct cleaning method of beer production equipment is introduced here. In the process of beer production, the generation and precipitation of impurities and dirt are always inevitable, so it is particularly important to master the correct cleaning method of beer production equipment. I hope that after reading the above, you can have a better understanding of how to clean the beer production equipment correctly. : Beer production equipment