【Beer production equipment]Requirements for lubricants for miniature beer equipment

Nowadays, the brewing of beer is no longer a manual operation. It is more convenient to brew beer with beer production equipment, and the efficiency is still high. It can be brewed in batches, and there are many beer equipments on the market, the more common is the miniature beer equipment, the following beer production equipment company-- Trano introduces the requirements for lubricants for miniature beer equipment. (1) The lubricant of micro beer equipment shall conform to food hygiene standards, be safe, non-toxic and tasteless, and be suitable for EPDM (B hydrocarbon C Tsuen ethylene)The rubber sealing material has no destructive effect; (2) Due to long-term water and steam environment, it is necessary to have good water resistance, small loss of water Lin, good emulsification resistance, rust resistance, strong adhesion and good sealing performance; (3) Can withstand the Depression, the picking point must be above 175 ° C, there is no clear and softening phenomenon at 85 ° C; (4) The moistening and clearing grease used in beer production equipment must be able to resist the attack of cold water, hot water, disinfectant, cleaning agent and water swallow steam, and will not affect the formation of beer foam; (5) It has long service life and good extreme pressure and anti-abrasion and torsion ability to ensure less oil change and less maintenance. Extend the operation cycle of the equipment and the service life of the parts; (6)High pressure difference (0. 5MPa)And a small amount of loss in a vacuum environment. In the past, the ordinary production line of our factory used domestic food machinery grease as the lubricating agent for the central distribution pipe and other parts, and the effect was poor. In the production process, it was often easy to turn over gas and group wine, expensive imported rubber-like seals have to be replaced every two or three months. Every year, the inner and outer walls of the central distribution pipe are ground and processed by electric vessels, or even replaced in complete sets. It not only increases the cost of beer production equipment, affects the production efficiency, but also is easy to hide dirt and dirt, affecting the control of microbial indicators. The use of lubricants is very important for beer production equipment, so everyone must pay more attention when purchasing lubricants and purchase high-quality lubricants, this is also very helpful for brewing beer with miniature beer equipment. : Beer production equipment, miniature beer equipment