Daily maintenance should be paid attention to when using the filling machine

In domestic filling machines, many brands have not only been widely used in China, but also have moved to the international market. This shows that the quality of the filling machine we produce has reached the international level. There are many filling machines produced by manufacturers that can make such a promise. As long as they can do the correct daily maintenance work when they are used, they do not have to consider eliminating the machinery they are using when half of them are upgraded. From this we can see how important it is to do a good job in the maintenance of the filling machine. Here, I 'd like to introduce how to do a good job in the daily maintenance of the filling machine. First, check the moisture filter and oil mist device that will start the combination before each new start-up. If too much water is found, it should be dumped in time. If the lubricating oil needs to be filled, don't be careless. However, in general, lubricating oil can be added once every six months, but if there is an accident, it should be faced flexibly. Second, always check whether the grounding wire is in firm contact, and also check the starting pipeline, air pressure and motor chain accordingly. If it is found that it is not in normal working condition, the machine should be stopped immediately and repaired. Third, check whether the mechanical parts are in a normal cloud state regularly, and then check whether the screws are loose. Fourth, after each shutdown, we should do a good job in the treatment of fertilizer, and then do a good job in cleaning and sanitation everywhere, which is also a kind of maintenance for machinery. Fifth, under normal use, the filling machine cannot be moved or collided. :