Description of operation process of beer filling machine
With the rapid development of beer industry, beer filling machine has been widely used. In order to ensure that beer filling machine will not fail in the working process, before using the beer filling machine, you must understand the operation process of the beer filling machine. 1. Before using the beer filling machine, you need to carefully read the instruction manual to ensure the correct operation of the beer filling machine. 2. Place the beer filling machine safely and fix it. 3. Use DN25 pressure-resistant hose to connect the liquid inlet of the isobaric filling machine with the beer buffer tank (Wine tank)Liquid outlet, solid and reliable connection; The carbon dioxide air inlet of the isobaric filling machine (Outer diameter: 8mmPU tube) Connect with the backup pressure pipe of the beer buffer tank to ensure that the filling pressure of the filling machine is consistent with the pressure in the beer buffer tank. 4. Connect the power supply (Single phase 220 V), Compressed air source (Air source pressure shall not be less than 0. 4 MPa) , With an outer diameter of 10mmPU tube, please add about 2/3 cup of sewing machine oil to the right oil cup of air source processor afc2000. 5. Adjust the filling height according to the height of the filling barrel or bottle. The height of the bottle mouth should be the same as that of the air inlet of the filling valve (Return air hose) The lower mouth is flat or low 1 ~ 5mm, polyester bottle can be used as a special bottle rack, which can be adjusted at one time according to the height of the bottle mouth. The above is the description of the operation process of the beer filling machine introduced to you. After the beer filling machine is used, the maintenance work of the machine should be done well, so as to better ensure the better work of the filling machine.
How is the can made?
There are two kinds of materials for making cans: one is aluminum, and the other is tinplate. The consumption of aluminum metal materials used in packaging containers in the United States reached 1,992,000 tons in 1998, an increase of 2.24% over 1997, making it the second largest consumer market, accounting for 21.6% of the annual aluminum consumption. In the United States, aluminum sheets have always been used as materials for cans, and about 40% of aluminum sheets are used in the production of cans every year. The strong opponent of aluminum in the packaging industry comes from PET materials. PET materials can be made into strange appearances through injection molds, while aluminum materials are relatively difficult. However, there is a big difference in the prices of the two materials. PET is affected by the price of oil. Aluminum can be recycled through its own recycling, reducing material costs, and is valued by environmental organizations.
Who invented the can?
In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA, invented a can, that is, the material of the can lid is processed to form a rivet, and the jacket is pulled up. The ring is riveted again and matched with the corresponding notches to form a complete lid. The invention of this day made a historic breakthrough in the metal container after 50 years of long development. At the same time, it also laid a solid foundation for the development of the canning and beverage industry. Cans originated in the United States and became popular in the United States.
How many years of experience does Yantai Trano have in producing beer keg ?
beer keg has been exquisitely made by Yantai Trano for 15 years. We have obtained mature and state-of-art techniques through research and development for these years and they prove to be applicable and feasible to improve the product performances
What are raw materials for stainless steel beer keg production?
If this question is asked, you may consider cost, safety and functionality of stainless steel beer keg . A manufacturer is anticipated to make sure the origin of raw material, decrease the price for raw material and embrace innovative technologies, in order to improve the performance-cost ratio.