Do you know the five maintenance tips of beer filling machine?
Nowadays, beer filling machine, as a common filling machine in beer production equipment companies, is popular in the market and favored by consumers, but at the same time there are also some problems, how to use the equipment for a period of time, there will be some problems, which requires the operator to carry out regular maintenance, then do you know what are the tips for maintaining the filling machine? Today, the beer barrel cleaning machine will be shared with you below. Shandong trano suggests that you should do the following maintenance: 1. Daily construction and maintenance of beer production equipment, whether the motor is running normally, whether the safety environment is normal, and whether the cooling system is abnormal. Whether there is abnormal vibration, abnormal sound, abnormal overheating and discoloration. 2, regular inspection and maintenance, should check the starting components such as cylinder, solenoid valve, speed control and electrical parts every month. The inspection method can be manually adjusted to check the quality and operation reliability. The cylinder mainly checks whether there is air leakage and sticking phenomenon. The solenoid valve can be manually forced to operate to see if the electromagnetic coil of IP safety section is burned and the valve is blocked. The electrical part may be checked against the input and output signal indicator lights, such as checking whether the switching components are damaged, whether the lines are disconnected, and whether the output components are working properly. 3. After the whole filling is completed and stopped, wipe the dust and residual material liquid on the surface of the beer filling machine with half a thousand towels to avoid corrosion to the filling machine. Wipe the control panel with a thousand towels. On the buttons and connecting lines. 4. The operator on duty shall inspect the outer skin of the edible oil filling machine line every day, and the equipment manager shall conduct in-depth inspection of the connecting lines and joints of the filling machine every week to prevent the loose joints from affecting the filling accuracy, avoid leakage, short circuit and other safety accidents. 5. After each use on the same day, clean up the connecting pipes of the filling machine in time, especially when replacing products, use clear water to pass through the pipes three times (Filling outlet water 50 KG) And each time to fill the entire pipeline, after repeated three times, you can enter the pre-packaged state, but the whole barrel of the package should be poured into the reaction tank, re-stirring for 2 minutes before the formal packaging. As we all know, the use of beer equipment can greatly improve the filling efficiency of beer, but some enterprises do not pay attention to the maintenance of beer filling machine, greatly shortening its service life. Therefore, beer barrel cleaning machine manufacturers recommend that you regularly maintain it and extend its service life. : Beer filling machine