Five tips for daily maintenance of beer filling machine

As we all know, beer filling machine is a kind of canned machinery equipment applied in beer enterprises. After a long time of use, the filling machine will have some problems that cannot be avoided, so do you know how to maintain it in daily life? What are the skills? Maintenance can extend its service life! Next, let's follow Shandong trano to learn about it! Here are five tips for the daily maintenance of beer filling machines: 1. Regular inspection and protection: the engine components such as cylinder, solenoid valve, speed regulation and electrical parts shall be checked monthly. The viewing method can be manually adjusted to check the good or bad and the reliability of the action. The cylinder mainly checks whether there is air leakage and stagnation. The solenoid valve can be manually forced to act to see if the electromagnetic coil of the IP safety section is burned and the valve is blocked, the electrical part may be checked against the input and output signal indicator lights, such as checking whether the switching elements are damaged, whether the lines are disconnected, and whether the output components are working properly. 2. After the whole filling is completed and the machine is shut down, the dust and residual liquid on the surface of the filling machine equipment shall be scrubbed with half a thousand towels to avoid corrosion to the filling machine. In addition, scrub the control panel with a thousand towels. On the buttons and connecting lines. 3. Daily factory building and protection: whether the motor is operating normally, whether the safe environment is normal, and whether the cooling system is abnormal. Whether there is abnormal sensation, abnormal sound, whether there is abnormal overheating, discoloration. 4. After each application on the same day, the connecting pipes of the filling machine should be sorted out in time, especially when replacing products, clean water should be used in the pipes three times (Filling outlet water 50 KG) And each time to fill the entire pipeline, so repeat three times in the future, you can enter the pre-packaging status, but the whole barrel of the package should be poured into the reaction tank, re-mixing for 2 minutes before the formal packaging. 5. The operator on duty checks the outer skin of the edible oil filling machine line every day, and the equipment manager checks the connecting line and joint of the filling machine in depth every week to prevent the joint from falling loose and affecting the filling accuracy, avoid leakage, short circuit and other safety accidents. The above are the five tips for the daily maintenance of the beer filling machine introduced by Shandong trano. I believe that after reading the above contents, we have a certain understanding of the filling machine, I hope that the above content can help everyone. In addition, it is recommended that you regularly carry out maintenance inspections on the filling machine, do a good job of maintenance, and extend its service life as much as possible. : Beer filling machine