Four matters needing attention in daily maintenance of beer filling machine

During the operation of the beer filling machine, if there is good daily maintenance and maintenance, it can greatly extend the service life of the beer filling machine and improve the efficiency of the filling work, it can be seen that the beer filling machine has a good daily maintenance method, which is very important. Here, the beer filling machine manufacturer introduces in detail the four matters needing attention in the daily maintenance of the beer filling machine. Four matters needing attention in the daily maintenance of beer filling machine: 1. Because this beer filling machine is an automatic machine, the sizes of easy-to-pull bottles, bottle pads and bottle caps are required to be unified at this time. 2. When adjusting the machine, the tools should be used properly. It is strictly forbidden to use too large a tool or too hard to disassemble the parts to avoid damaging the parts or affecting the performance of the machine. 3. Every time the machine is adjusted, the loose screw should be tightened in fact, and the machine can be driven after being turned by shaking the handle to see if its action meets the requirements. 4, beer filling machine machine must be kept clean, it is strictly prohibited to have oil, liquor or other debris on the machine, so as not to cause damage to the machine, the purpose of daily maintenance of beer filling machine is to reduce the failure rate of equipment and prolong the service life of equipment, so as to * greatly improve the filling efficiency. Daily maintenance of beer filling machine is especially important in enterprise production, therefore, the beer filling machine must be carefully maintained during daily use.