How stable filling machine filling quantity, what is the operating mode is worth learning!

how stable filling machine filling quantity? To this problem: for filling machine, we often use quantitative filling machine, it is the working principle of the piston,. Few people know how common filling machine stable filling machine filling quantity, today I to introduce in detail.

for filling quantity is not stable, may point out the following two reasons:
( 1) Air pressure is not stable; Add aerodynamic driven by cylinder, so when the pressure is not stable, it will produce very big effect to add volume precision of the machine, so the machine to ensure that the pressure source, the stability of the air.
solution: you can check on the machine pneumatic three cylinder pressure gauge to check the air pressure for the problem. Because open the machine for the first time the air pressure is higher, so the filling will produce great error for the first time. In this case, the research is not recommended three pneumatic cylinder.

　　( 2) Have a leakage phenomenon; Filling part of the machine to seal. If there is a gas leak, will affect the filling precision, and most of the large machine filling error is caused by a gas leak.
solution: if the contact position for feedback tube and filling machine form bubbles, then you can come to the conclusion that the machine is leaking. At this point, to examine all butt joint, to ensure that the sealing ring was not damaged. According to the above, will determine the location of the leak. Usually, this is caused by some pipe joint did not seal weld, check need to pay attention to in the process.

filling machine after the simple adjustment of several parts, the machine also can be used in the production of pure water and mineral water. The isobaric filling technology, filling fast, stable, accurate. It is equipped with perfect return system, oxidation can avoid secondary pollution and drink. Can satisfy the requirements of the below 95 hot filling, and is equipped with CIP cleaning system.

to introduce above, is stable filling machine filling amount of operating mode. Filling machine can clean liquid contact equipment, such as liquid storage tank and pipeline; It adopts touch screen man-machine interface control, inverter control and other advanced technology.