A Manufacturer and Supplier of Beer Kegs, Beer Keg Washing and Filling Machines, etc.

How to debug the filling quantity of small liquid filling machine?

by:Trano     2019-12-31
Nowadays, small liquid filling machines have entered thousands of households, but there are still many friends who don't know how to debug the filling capacity of small liquid filling machines. Today, beer filling machine manufacturers will tell you how to debug the filling capacity of small liquid filling machines. The filling capacity of the small liquid filling machine must be debugged before use. The debugging of liquid filling machine directly affects the production efficiency and product quality. Therefore, it is particularly important to master how to debug the filling quantity of small liquid filling. 1. The first small liquid filling machine must be debugged before use. The debugging of liquid filling machine directly affects the production efficiency and product quality. Therefore, it is particularly important to master how to debug the filling capacity of small liquid filling machines. 1. First loosen the nut and then adjust the screw to change the position of the lower fixing rod. Therefore, the push-pull length of the syringe is also changed to achieve the purpose of free adjustment of the dispensing amount. The screw is adjusted clockwise to increment, otherwise it is reduced, and the pointer is indicated. Use a 100 needle tube to see the 500 side, use a needle tube to see the side, 20, directly look at the scale, pointer quantification, however, due to the different thickness of each needle tube, there is an error in the actual dispensing volume, which is based on the needle tube scale. It is also possible to use the measuring cup to measure the most accurate when starting the dispensing. 2. After the small liquid filling machine is adjusted, the nut is tightened immediately to make the lower fixing Rod and the crank firm. 3. Loosen the nut and determine the correct position of the upper fixing Rod according to the push-pull length of different syringes. After the lower fixing rod is adjusted, turn the crank to turn the syringe to the upper dead center, and then lift the outer sleeve of the syringe up by about 2mm to avoid smashing the needle tube, and then tighten the nut before starting the machine. 4. Open the switch after the small liquid filling machine is assembled correctly. When the machine works, the crank drives the syringe to pull the liquid up and down, adjust the speed knob, select the appropriate dispensing speed, and start normal work, adjust the governor knob, the clockwise dispensing speed is fast, and the speed is slow. With the development of filling machine technology, small liquid filling machines are developing towards diversification. Different enterprises have different functions and operations of liquid filling machines, beer filling machine experts suggest that after purchasing a small filling machine, you must consult the manufacturer clearly about how to debug it to avoid damage to the filling machine due to wrong operation. :
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: keg@sskeg.com