A Manufacturer and Supplier of Beer Kegs, Beer Keg Washing and Filling Machines, etc.

How to install the filling machine correctly?

by:Trano     2019-12-30
How to install the filling machine correctly? In this chapter, the beer filling machine manufacturer will first talk to you about this installation problem. I hope that everyone can be unique in the installation of the filling machine. In the process of using the filling machine, safety is of vital importance, so how should we use the filling machine safely, starting with the correct installation of the filling machine. The correct installation of the filling machine should follow the steps: 1. The air filtration pressure regulating valve should be removed from the filling machine. During the use of the filling machine, safety is of vital importance, so how should we safely use the filling machine? First, we should start with the correct installation of the filling machine. The correct installation of the filling machine should follow the steps: 1. Take the air filtration pressure regulating valve out of the filling machine chassis and install it on the right side of the front of the chassis. Unscrew the duplex oil cup and fill it with lubricating oil to the horizontal line, about, not full. 2. Insert the compressed air pipe into the double air inlet (φ8 tubes, Φ10 tubes) After opening the air outlet valve of the air compressor, adjust the two knobs on the joint, and adjust the pressure on the right side. Lift the knob when adjusting, rotate clockwise to increase the pressure, rotate counterclockwise to reduce the pressure, and adjust the pressure at 0. 3-0. 4Mpa (3-4 kg/C ㎡) The right side is adjusted for the oil intake of the lubricating oil, which can be rotated left and right according to the fuel consumption, generally 10- Use up a cup of oil in 15 working days and then add it. 3. Check the electrical parts and whether the connectors are firm. 4. Turn on the power supply 220V and connect the grounding wire to ensure safety. The working voltage of this machine is 24 v dc. 5. Put the foot switch in front of the workbench of the filling machine, and the foot will work once at a time. If the foot is not loose, the equipment will work continuously. 6. Connect the oil inlet pipe, connect it with steel wire hose, wrap the interface around the sealing tape, and tie it tightly with steel wire to prevent air leakage. The pipe is not allowed to be equipped with filtering equipment. 7. Adjust the metering magnetic switch of the filling machine to the corresponding filling position, subject to the upper end of the magnetic switch, and then fill the test several times to drain the air in the pipeline. In this chapter, the beer filling machine manufacturers will talk to you first. If you have any questions in this regard, you can enter our official search for answers. Let's talk again! :
Custom message
Chat Online 编辑模式下无法使用
Chat Online inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: keg@sskeg.com