Aluminum beverage cans are used for packing beer, soft drinks, craft beer, coffee, tea and new energy drinks etc...


Jinan Beer filling machine manufacturers have reliable quality and less maintenance

by:Trano     2019-12-25
In addition, beer filling equipment should be isolated from other equipment. The lubricating part of the filling machine and the filling material part should prevent cross contamination. Special soapy water or lubricating oil should be used for lubrication of conveyor belt. The liquid filling machine is used to fill all kinds of liquids, including all kinds of beverages, medicines, etc. Because the filling is liquid, the container of the liquid filling machine must be kept clean. The filling container used must be strictly inspected and cleaned, and the filled beverage cannot be contaminated. That is, the liquid storage tank is in a vacuum, and the packaging container first pumps air to form a vacuum equal to that in the liquid storage tank, and then the liquid material flows into the packaging container by its own weight. Due to its complex structure, it is seldom used in China. Vacuum filling is widely used, I . e. it is suitable for filling liquid materials with slightly higher viscosity, such as oils, syrups, etc. In addition, the current number is large, the model is many and different, the batch is small, and the support between enterprises is poor. It is also a problem in the growth of filling machines. With the strong growth of social economy, both individual users and large enterprises are constantly growing and expanding. More and more of them are growing towards the goal of automation, the production line plays an important role in realizing the automatic production of user enterprises. Feed valve pressure method this machine is mainly transported by fluid (Ie feeding system), Container delivery (Bottle supply system) , Filling valve, large turntable, transmission system, body, automatic control and other departments. The bottle is completed in the filling machine in sequence: 1. Air intake; 2. Liquid intake and return air; 3. Curb liquid intake; 4, remove the remaining liquid and other 4 tracks. At the same time, all kinds of detection state sensors on the production line are connected to the PLC, and the PLC controls the whole system according to the detection state of the sensors. For general edible liquid materials such as bottled milk, bottled wine, carbonated beverages, etc. , isobaric filling method, vacuum filling method, etc. can be adopted, but considering the cost, isobaric filling method can effectively reduce the loss of CO2, connect the quality of aerated beverages, prevent excessive foaming during filling, and ensure accurate filling measurement. Therefore, this paper adopts isobaric filling method. The isobaric method and the vacuum method are filled under the condition of lower than atmospheric pressure, and can be carried out in two ways: the bottle is driven by the turntable of the filling machine to twist around the main vertical shaft for continuous filling. Before each work of the filling machine, use 0 ~ Water at 1℃ reduces the temperature of the filling tank and the conveying pipeline. When the filling temperature exceeds 4℃, the temperature should be lowered first and then the filling operation should be carried out. The use of insulation tank, constant temperature irrigation, so that the material in the filling of the specified time to maintain a certain constant temperature, so as not to cause the filling machine due to excessive temperature changes and unstable work. It is also used for filling liquid materials containing vitamins, such as vegetable juice, fruit juice, etc. The formation of vacuum in the bottle means that the contact between the liquid and the air is reduced, and the shelf life of the product is delayed, the vacuum method is also suitable for filling toxic materials, such as pesticides, to reduce the overflow of toxic gases and improve working conditions. Fuanda Machinery Equipment Co. , Ltd. has developed and developed 1L and 1. 5L, 1. 8L, 2L open type and 5L, 10L, 15L, 20L, 30L, 50L closed beer barrel cleaning and filling equipment three series, more than 40 kinds of products. :
Custom message
Chat Online
Chat Online
Leave Your Message inputting...
Dear customer, there are too many consultants at present, and you may not be able to reply in time. You can describe what you want, and we will reply you in time.If it is urgently,please contact us +86 13054501345 (WhatsApp and Wechat), E-mail: keg@sskeg.com
Sign in with: