Production process of mineral water production equipment

1. The raw water tank stores the raw water, which is used to precipitate large sediment particles in the water and other precipitable substances. At the same time, buffer the impact of unstable water pressure in the raw water pipe on the water treatment system. ( Such as pressure sensing reaction caused by too low or too high water pressure). 2, the original pump constant system water supply pressure, stable water supply. 3. The multi-media filter adopts a filter with multiple filter layers. The main purpose is to remove the substances with particles above 20um such as sediment, rust, colloidal substances and suspended solids contained in the raw water, manual valve control or full-automatic controller can be used for a series of operations such as backwashing and forward washing. Ensure the water production quality of the equipment and prolong the service life of the equipment. 4. Activated carbon filter system adopts fruit shell activated carbon filter. Activated carbon can not only adsorb electrolyte ions, but also carry out ion exchange adsorption. Activated carbon adsorption can also make potassium permanganate oxygen consumption (COD)By 15 mg/L (O2)Drop to 2 ~ 7 mg/L (O2) In addition, due to the adsorption effect, the concentration of surface adsorption Replication increases, therefore, it also plays a catalytic role in removing pigment, peculiar smell, a large amount of biochemical organic matter in water, reducing the residual chlorine value of water and pesticide pollutants, and removing trihalide in water (THM)And other pollutants. Manual valve control or full-automatic controller can be used for a series of operations such as backwashing and forward washing. Ensure the water production quality of the equipment and prolong the service life of the equipment. At the same time, the equipment has a self-maintenance system and the operation cost is very low. 5. Precision dense filter precision filter, the shell of the cylinder is generally made of stainless steel, and tubular filter elements such as PP meltblowing, wire burning, folding, titanium filter element and activated carbon filter element are used as filter elements, according to different filter media and design process, different filter elements are selected to meet the requirements of effluent quality. This equipment is widely used in water treatment industry and is an ideal equipment for water quality purification.