Teach everyone how to clean beer production equipment correctly
Speaking of beer production equipment, everyone should know it, but they may not know much about it. Since the equipment needs to be in constant contact with materials during use, it will accumulate a lot of dirt, this has a great impact on the quality of the beer it produces. Do you know how to clean the equipment correctly? Next, Shandong trano, a beer filling machine manufacturer, will introduce it to you below. 1. Cleaning the heat exchanger in principle, cleaning the heat exchanger is the same as cleaning the pipeline. In the normal operation State, the medium in the heat exchanger is in the prime flow state, so if you want to have a better cleaning effect, the heat exchanger in the production equipment should be cleaned with a cleaning solution about 20% to higher than the original design flow rate. 2. Automatic can washer can be used to clean the tank in the production equipment. The can washer is divided into two types: mechanical type and spray ball type. If the beer production equipment is dirty or the diameter of the tank is relatively large, this situation is suitable for the mechanical can washer, because its outlet pressure can be increased, which can increase the cleaning strength and increase the cleaning radius. Compared with the spray ball can washer, the mechanical can washer has a lower flow of cleaning solution when in use. 3. Cleaning pipelines in order to enhance the cleaning effect, attention should be paid to playing its mechanical role when cleaning pipelines in production equipment. In order to receive better cleaning effect, when using hot cleaning solution, the flow rate in the tube should be controlled to 1. 5 per second; When using cold cleaning solution, different flow rates should be determined according to different pipe diameters. At the same time, the cleaning problem of CO and compressed air pipelines and their accessories should also be paid attention. 4, cleaning production equipment parts and machines There is no fixed method for cleaning parts and machines of production equipment. It is OK to clean according to the normal cleaning steps of general equipment. In the process of beer production, the generation and precipitation of impurities and dirt are always inevitable, so it is particularly important to master the correct cleaning method of beer production equipment. I hope that the above-mentioned beer filling machine manufacturer Shandong trano's four tips on correct cleaning equipment can be helpful to everyone. : Beer production equipment
Custom decorated Aluminum Cans in 2022 for Beverages
Do you want to open a food chain or a beverage company? Do you want to grow your business of soft drinks or beverages in the market? The answers to your all inquiries are here in this informative article about the importance of custom aluminum cans.
The Advantages of Using Custom Aluminum Cans
Because Custom Aluminum Cans are better for the environment, they are the best choice for food. There are more recycled materials in Custom Aluminum Cans than in other types of packaging. This makes it easier to recycle custom aluminum cans than other types of packaging.
Why Choose an Aluminum Can As a Beverage Container?
There are many reasons to use an aluminum can as a beverage container. They can be recycled multiple times, but they are also highly recyclable, generating significant economic and environmental benefits. It's also worth noting that the material is 68 percent recyclable, compared to just three percent for plastic bottles.
Custom Aluminum Cans For Beverage Brands
For the best quality and lowest price, opt for printed cans. Minimum order of 90,000 to 180,000 cans is needed, and you can expect to receive at least 12 to 25 pallets. With many different types of designs and finishes, you can create the perfect custom aluminum cans to fit your needs and budget. If you're a small business or have a limited budget, consider wrap-on adhesive labels. These cans are designed to be durable even when wet.
How is the can made?
There are two kinds of materials for making cans: one is aluminum, and the other is tinplate. The consumption of aluminum metal materials used in packaging containers in the United States reached 1,992,000 tons in 1998, an increase of 2.24% over 1997, making it the second largest consumer market, accounting for 21.6% of the annual aluminum consumption. In the United States, aluminum sheets have always been used as materials for cans, and about 40% of aluminum sheets are used in the production of cans every year. The strong opponent of aluminum in the packaging industry comes from PET materials. PET materials can be made into strange appearances through injection molds, while aluminum materials are relatively difficult. However, there is a big difference in the prices of the two materials. PET is affected by the price of oil. Aluminum can be recycled through its own recycling, reducing material costs, and is valued by environmental organizations.
Who invented the can?
In 1959, ERNIE.C.FRAZE of DRT Company in Teton, Ohio, USA, invented a can, that is, the material of the can lid is processed to form a rivet, and the jacket is pulled up. The ring is riveted again and matched with the corresponding notches to form a complete lid. The invention of this day made a historic breakthrough in the metal container after 50 years of long development. At the same time, it also laid a solid foundation for the development of the canning and beverage industry. Cans originated in the United States and became popular in the United States.
How many years of experience does Yantai Trano have in producing beer keg ?
beer keg has been exquisitely made by Yantai Trano for 15 years. We have obtained mature and state-of-art techniques through research and development for these years and they prove to be applicable and feasible to improve the product performances
What are raw materials for stainless steel beer keg production?
If this question is asked, you may consider cost, safety and functionality of stainless steel beer keg . A manufacturer is anticipated to make sure the origin of raw material, decrease the price for raw material and embrace innovative technologies, in order to improve the performance-cost ratio.