Teach everyone how to maintain beer filling machine? Bai guan to weapon

Everyone should have heard of the beer filling machine, but they may not know much about it. It is a production equipment for canned beer. Do you know what problems you need to pay attention to when using the equipment and how to maintain the equipment? Don't worry, everyone. Next, Shandong trano, a filling machine manufacturer, will introduce it to you below. I hope everyone likes it. The following are some maintenance techniques for filling machines, as follows: 1. After the machine is adjusted, the loose screws should be tightened first, after turning the machine with a shaking handle to see if its action meets the requirements, you can drive. 2. When adjusting the equipment of the beer filling machine, the tools should be used properly. It is strictly forbidden to use too large a tool or too hard to disassemble the parts to avoid damaging the parts or affecting the performance of the machine. 3, the machine needs to be kept clean, should be cleaned once a week, especially in the normal use is not easy to clean or use compressed air to clean, it is strictly prohibited to have oil, liquor or other debris on the machine, so as not to cause machine corrosion. 4. Because the filling equipment is an automatic machine, the sizes of easy-to-pull bottles, bottle pads and bottle caps are required to be unified. 5, the machine in the production process in a timely manner to clean up the liquid or glass fragments. 6, clean the whole parts of the machine surface before the shift, and add clean lubricating oil for each activity department. These are some of the methods of maintaining and maintaining beer filling machines introduced by Shandong trano, a filling machine manufacturer. I believe you have a further understanding of the filling machine after reading the above contents, I hope the above contents can be helpful to everyone. It is suggested that everyone should carry out regular maintenance to prolong their service life as much as possible.