The methods of dealing with the beverage filling machine equipment failure

beverage filling machine is for washing, filling and sealing of multifunctional), is the ideal performance of one of the small and medium-sized drink machines. So if this series of beverage filling machine malfunction, how can we solve?

　　1. Filling volume error:
when filling big norms product, caused by a lack of material tank filling, cause the liquid level is not stable, can increase the filling quantity or to close small filling head side of the ball valve, adjusting the fill time, extend the fill time, to slow the filling speed to solve the problem.
adjust dial-up or after the unit number, time constant, turn off the power supply at this time, to connect the power.

　　2. Filling liquid level stable, inaccurate:
with sundry jam beverage machinery filling channel, mainly in the entrance to the manger or feed port, please check and clean up.

　　3. Shut down after the drip:
orifice damaged, try to mend the orifice with discharging mouth, orifice diameter shall not be greater than 7. 5 mm。 After water sand paper on fixed aperture, gently will surface grinding flat orifice.

4. The filling head ball valve damage, should be replaced.
touch switch after not note material, time relay digital indicator LED does not flash:
the drink machines the injection material switch is damaged or time relay pedestal looseness, should replace the same type of material injection switch or press tight time relay base.

　　5. Time relay digital LED lights flashing, when coming up against note material switch but not injection:

must first confirm whether air pressure or pressure is too low, can also be a water dispenser of solenoid coil is damaged, or air valve core was stolen card dead, can pull the power supply, open the panel, use items rotation or press the corresponding button beside a solenoid coil, as can the reversing valve, which show that the electromagnetic valve coil is damaged, if not the reversing, is stuck valve coil, replaceable to repair or disassemble valve solenoid valve coil.

the above is to introduce the beverage filling machine equipment failure repair way, if you also happened to encounter the problem above, please refer to our web site content!