Troubleshooting and solution of beer filling machine without material

Generally speaking, after using the beer filling machine for a long time, there may be a failure that does not produce materials. In view of this problem, the manufacturer of beer filling machine lists several possible causes and troubleshooting methods for the failure of filling machine. To solve the failure of the failure of the beer filling machine, we must first understand the cause and solution of the failure, the summary here is as follows: Troubleshooting: 1. First check whether there are any products in the hopper, please add them if not. Note: The products in the hopper cannot be less than one tenth, and continue filling less than one tenth, it will affect the accuracy of filling. 2. Check whether the filling and filling liner is blocked. The blockage is divided into two types: first, the machine was filled in the last time and was not cleaned for a long time, resulting in the product inside the liner solidifying and blocking the liner, second, there are sundries in the product, stuck in the liner piston, resulting in poor sealing effect, the above two cases, please clean up in time, so as not to damage the piston. 3, the above two situations can not solve the problem, which is that the sealing ring on the liner piston has been damaged, please replace, the part of the Hopper below the product to the filling nozzle is called the liner. Operation Guide: 1. Before use, clean the hopper and add beer. 2. After adding the product, press the manual joystick by hand until the product can normally come out of the filling nozzle. 3. After the product can come out normally, start to adjust the filling quantity. There is a plastic nut under the hopper. The clockwise twisting filling quantity becomes smaller, but on the contrary becomes larger, and the filling quantity you need is debugged, that is, you can start working. We can judge according to the troubleshooting method of filling machine without material introduced above, and then try to solve it correspondingly, but if we can't solve it, it is necessary to ask professional maintenance personnel to check to prevent damage to the filling equipment.